Fleck 5600SXT 48000 Grain Water Softener Review

Fleck 5600SXT 48000 Review

Fleck 5600SXT 48000 Review

  • AFWFilters install kit for easy installation
  • Made in the USA, AFWFilters are easy to install, easy to use
  • The Fleck 5600sxt digital metered, on-demand valve. The newest 5600 model with fully programmable cycles
  • Fleck 5600SXT Digital Control Head with bypass valve and 1" threaded plumbing adapter (yoke)
  • 10" x 54" tank, 15” x 34” brine tank with safety float system

There may not be too many people out there who have actually heard of the thing known as a water softener. Well, to better understand what such a device is, people will first have to learn about what hard water is. In its simplest definition, hard water is water that consists of more minerals (magnesium and calcium) than ordinary water.

Fleck 5600SXT 48,000 Grain Water Softener Digital SXT Metered Whole House System

Unfortunately, these minerals can more often than not clog pipes. In addition to that, they also tend to make it harder to dissolve detergent and soap in water. This is why water softening is required and it can be accomplished by means of a water softener. What such a device does is simply gets rid of those minerals.

When it comes to such a device, people can often choose between a manual, semi-automatic and automatic device. However, one good suggestion here is the Fleck 5600SXT 48,000 grain water softener digital sxt metered whole house system.

How Fleck 5600SXT Grain Water Softener

Even though it is recommended that people purchase the device mentioned earlier, it is always a wise idea for them to first learn how such a water softener filtration system really works. In most cases, these devices attempt to fight against the hard water by making good use of salt as well as ion-exchange resins.

Normally, the manufacturer of such a device will coat the resin inside a sodium material. As a result, when the resin beads detect incoming hard water, they will move away from the ions of the minerals to the active resin sites. The place of the minerals will then be taken by sodium ions.

However, there is something important to keep in mind in regard to water softener resin beads. There are times when the resin beads will eventually have to be replaced. People can tell when it is time to replace those beads if their water softener system no longer outputs any soft water.

So, if it is time to replace the resin beads, what people should do is to first measure the depth of the resin tank. This is to find out for sure the amount of new resin they will need. They can purchase the resin either at an online store or at a land-based store. After purchasing the resin, they can begin installing it into the tank.

Why Choose Fleck 5600SXT Water Softener from Fleck 

There are dozens of water softening systems to avail out there so it is only appropriate for people to demand to know why they should buy the Fleck 5600SXT 48,000 grain water softener digital metered whole house system instead of other devices. The reason is that the offering from Fleck comes with the following lucrative features:

  • An on-demand valve and a digital metering system
  • The latest iteration of the product even comes equipped with cycles that users can fully program the way they desire.
  • Features a digital control head that is accompanied by a bypassing valve
  • Features a yoke or a threaded plumbing adapter that measures 1 inch
  • Can be used ideally in a household that consists of 3 to 6 people
  • Effective to treat moderately to severely hard water
  • Capable of handling 12 gallons of water per minute

Things to Keep in Mind when buying Fleck 5600SXT

As with all products out there with exceptional quality, there are quite a few things that users will have to keep in mind. In the case of the Fleck 5600SXT, it is a wise idea to protect the device against a light. The thing is, light can trigger the growth of algae. Just for your information, algae are not and will never be friendly to a water softener.

Thankfully, there are two ways in which people can handle this issue. First, they can protect the tank with a stainless steel jacket. Or, second, they can coat the tank with 2 to 3 layers of either a semi-gloss or gloss paint, preferably of a dark color.

The next thing that people will have to keep in mind as well when it comes to such a softener is that they can’t install the device without filling up the brine tank with some water prior to the very first recharge. However, there is no need to worry about the resin beads as they mostly come pre-recharged.


User Review
0 (0 votes)

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.